-
M10-4 valves are double throttle check valves of sandwich plate design. They consist of two opposite located throttle check valves that limit flow in one direction and provide free return in opposite direction. They are used to limit flow of two actuator ports.
Technical data
Dn 10 | pn = 32MPa | pmax = 40MPa | Qn = 63 dm3/min | Qmax = 100dm3/min | CETOP 5
Rexroth: Z2FSK
-
One-way check valves VJM3-10 are used for leak-free closure of an oil flow in one direction. It is mainly used to avoid return flows or when the source of back pressure is expected in the hydraulic circuit.
Technical data
Dn 10 | pn = 32MPa | Qn = 63dm3/min | Qmax = 80dm3/min | CETOP 5
Argo-Hytos: MVJ3-10
-
Pilot operated check valves (Sandwich plates) Dn 10
VJH(2)M 2-10
Pilot operated check valves VJH(2)M2-10 in sandwich plate design are used to close one (VJHM2-10) or two (VJH2M2-10) actuator ports without leakage even during long idle periods.
Technical data
Dn 10 | pn = 32MPa | Qn = 80dm3/min | Qmax = 100dm3/min | CETOP 5
Rexroth: Z2SRK